LDI
*FORGED FACE
- Forged Titanium Insert For Greater Ball Speed
- Deep Perimeter Weighting For Forgiveness
- Ease Of Play
- Available in RH and LH
The LDI Irons (Long Distance Irons) are the longest hitting irons in our spectrum of iron models. For many golfers, the LDI Irons will make their game “young again!”
LDI irons abound with design features to maximize performance. The forged titanium face insert assures greater rebound for superior distance. Maximum forgiveness is achieved through the deep perimeter weighting. The micro-milled face coupled with laser cut grooves optimize spin rates. The progressive offset aids with maximizing launch angles and helps in squaring the clubface on the longer irons. The low center of gravity assures a high trajectory and the wide sole aids in stability.
When LDI irons are fit and built to each golfer’s unique swing, the golfer will experience an appreciable improvement in their game. As with all KZG irons, they can be purchased in any configuration making them ideal for combinations with hybrids.
The LDI Irons are universal. Every level of golfer has been giving them rave reviews.
Available in RH and LH, in any configuration, from #4-9, PW, AW and SW. A RH Driving Iron is also available.
| LDI | Driving Iron | 4 Iron | 5 Iron | 6 Iron | 7 Iron | 8 Iron | 9 Iron | PW | AW | SW | Tolerance |
|---|---|---|---|---|---|---|---|---|---|---|---|
| RH Loft (Degrees) | 18 | 20 | 24 | 27 | 30 | 34 | 39 | 44 | 50 | 56 | ±1.0 |
| LH Loft (Degrees) | N/A | 20 | 24 | 27 | 30 | 34 | 39 | 44 | 50 | 56 | ±1.0 |
| Lie Angle (Degrees) | 60 | 60.5 | 61 | 61.5 | 62 | 62.5 | 63 | 63.5 | 64 | 64 | ±1.0 |
| Weight (g) | 232 | 246 | 253 | 260 | 267 | 274 | 281 | 288 | 293 | 298 | ±3.0 |
| Offset (mm) | 6 | 5.5 | 5 | 4.5 | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | ±1.0 |
| Bounce (Degrees) | 0.0 | 0.0 | 1.0 | 2.0 | 3.0 | 4.0 | 5.0 | 8.0 | 9.0 | 10.0 | ±1.0 |
| Head Material | 431 Steel | ||||||||||
| Face Material | 17-4 Steel | ||||||||||
| Finish | Polished | ||||||||||
| 5 Iron Toe Height (mm) | 54 | ||||||||||
| 5 Iron Blade Length (mm) | 86 | ||||||||||
| Hosel Shape | Parallel | ||||||||||
| Grooves | V | ||||||||||
| Hosel Depth (mm) | 32 ± 1.0 | ||||||||||
| Hosel ID (mm) | 9.45 ± 0.05 | ||||||||||
| Hosel OD (mm) | 13.5 ± 0.2 | ||||||||||
| Bendability | ± 2°-3° |
See What Our Clients Are Saying
-
As I'm approaching the age of 60, I am coming to the realization I have lost 10 to 15 yards with my irons, not to mention the rest of my clubs. I tried the LDI during my club fitting session and couldn't believe I had found my old distance again. This is a forgiving iron as my mishits seem to get distance too. I highly suggest the LDI to others that are looking for distance and forgiveness.
Mike Larson
-
As a KZG dealer I have found the LDI to be an excellent fit for many golfers. In fact, most of my LDI sales have been to pretty good golfers.
Don Irving - Artisan Golf
Ottawa, Ontario -
In a recent fitting, my customer tested the KZG LDI, Tour Edge Hot Launch HL and Taylor Made M4 irons. After testing these heads the KZG LDI irons proved to be more accurate, the ball speed faster and the smash factor higher… with an incredible 15 yards greater distance than the other heads!
Dick Cicero of Pin High Custom Clubs
World’s Top 100 ClubFitter
Dunnellon, FL
-
“I aced #9 at White Sands … about 150 yards, back right pin. Took a choked down soft swing with a fair wind behind me. Tried to hit the front third of the green and feed it back. Hit and rolled 20 feet or so. I aimed for the right centre and luckily I blocked the shot a bit! Thank you Don of Artison Golf, for fitting me into KZG clubs.
Jim Wilson, Ottawa, Canada
-
I have owned a KZG iron since the early 90s. It’s the Forged series iron, and they were the best iron set I’ve had. However, I was lured away by Honma about 5 years ago and I was using their TW series irons. I was looking for a new set of irons this year. I went and tried the new Honma set. They were good, but yet again feels off the rack. I decided to go back to KZG, and found Phil Moore at The Nest at Goose Creek GC. A Certified KZG fitter. I am always drawn to a thinner top line irons, so I tried the forged irons. They are good, but Phil ask me to try the LDI irons because they are more forgiving. He was right. Dispersions were tighter and ball flights were much higher. I also got all 4 wedges (PW-LW). I’ve never seen my wedge shot went that high in the air.
I was so glad that I came back to KZG, and I’m shooting to lower my handicap. Pretty sure it won’t be too much problem with this perfectly fitted iron set.
Thank you KZG, and thank you Phil.
Wira Tjakra, Southern Califorina
